Power Inline Priority - D-Link xStack DWS-3200 Series Cli Manual

DXS/DWS-3200 series CLI Reference Guide

power inline priority

The power inline priority Interface Configuration mode command configures the priority of the interface from the
point of view of inline power management. Use the no form of this command to restore defaults.
Syntax
power inline priority {critical | high | low}
no power inline priority
Parameters
•
critical — The operation of the powered device is critical.
•
high — The operation of the powered device is in high priority.
•
low — The operation of the powered is in low priority.
Default Configuration
Low priority
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the priority of port 4 from the point of view of inline power management to 'high'.
Console(config)# interface ethernet 4
Console(config-if)# power inline priority high
Page 201