antenna
The antenna AP Interface Radio Configuration mode command configures an antenna for the transceiver. To
restore defaults, use the no form of this command.
Syntax
antenna {diversity | 1 | 2}
no antenna
Parameters
•
diversity — Specifies the antenna with the best signal.
•
1 — Specifies antenna number 1.
•
2 — Specifies antenna number 2.
Default Configuration
Diversity
Command Mode
AP Interface Radio Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures antenna 1 for the transceiver.
Console (Config-wlan-ap)# interface radio 802.11g
Console (Config-wlan-ap-radio)# antenna 1
Wireless AP Radio Commands
Page 542
antenna