Spanning-Tree Max-Age - D-Link xStack DWS-3200 Series Cli Manual

DXS/DWS-3200 series CLI Reference Guide

spanning-tree max-age

The spanning-tree max-age Global Configuration mode command configures the spanning tree bridge maximum
age. To restore the default configuration, use the no form of this command.
Syntax
spanning-tree max-age seconds
no spanning-tree max-age
Parameters
•
seconds — Time in seconds. (Range: 6-40)
Default Configuration
The default maximum age for IEEE Spanning Tree Protocol (STP) is 20 seconds.
Command Modes
Global Configuration mode
User Guidelines
When configuring the maximum age, the following relationships should be kept:
2*(Forward-Time - 1) >= Max-Age
Max-Age >= 2*(Hello-Time + 1)
Example
The following example configures the spanning tree bridge maximum-age to 10 seconds.
Console(config)# spanning-tree max-age 10
Page 303