Show Configuration - D-Link DGS-3100 SERIES Cli Manual

show configuration

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show current configuration information:
DGS3100# show configuration running
config snmp system_name DGS-3100
create vlan 2 tag 2
enable 802.1x
config 802.1x auth_protocol radius
config radius add 10.6.41.226 key 123456 auth_port 1812 acct_port 1813 priori
ty first
config ports (1-2,4-7) enable_reauth enable
config ports 3 port_control auto enable_reauth enable
config 802.1x auth_mode ports (1-7) mac_based
config 802.1x guest_vlan 2 state enable
config 802.1x guest_vlan ports 3
config ipif system dhcp
DGS3100#
56 bytes from 10.6.150.34: icmp_seq=1. time=0 ms
56 bytes from 10.6.150.34: icmp_seq=2. time=0 ms
56 bytes from 10.6.150.34: icmp_seq=3. time=0 ms
----10.6.150.34 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0
Success.
DGS3100#
To display the current or saved version of the configuration settings
of the Switch.
show configuration [running | startup]
The show configuration command displays the current or saved
version of the configuration settings of the Switch.
running – Displays the current configuration.
startup – Displays the configuration saved in NV-RAM.
None.
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
22