show wlan aps counters
The show wlan aps counters Privileged EXEC mode command displays information on the AP traffic.
Syntax
show wlan aps counters [radio a | g] [ap name]
Parameters
•
radio a | g — Specified Radio type. If unspecified shows the total traffic on the AP.
•
ap name — Specified AP name. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Wireless AP General Commands
Page 500
show wlan aps counters