DXS/DWS-3200 series CLI Reference Guide
show qos aggregate-policer
The show qos aggregate-policer Privileged EXEC mode command displays the aggregate policer parameter.
Syntax
show qos aggregate-policer [aggregate-policer-name]
Parameters
•
aggregate-policer-name — Specifies the name of the aggregate policer to be displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines.
Example
The following example displays the parameters of the aggregate policer called 'policer1'.
Console# show qos aggregate-policer policer1
aggregate-policer policer1 96000 4800 exceed-action drop
not used by any policy map
Page 229