Dot1X Guest-Vlan - D-Link xStack DWS-3200 Series Cli Manual

dot1x guest-vlan

The dot1x guest-vlan Interface Configuration (VLAN) mode command defines a guest VLAN. To restore the
default configuration, use the no form of this command.
Syntax
dot1x guest-vlan
no dot1x guest-vlan
Default Configuration
No VLAN is defined as a guest VLAN.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Use the dot1x guest-vlan enable Interface Configuration mode command to enable unauthorized users on an
interface to access the guest VLAN.
If the guest VLAN is defined and enabled, the port automatically joins the guest VLAN when the port is
unauthorized and leaves it when the port becomes authorized. To be able to join or leave the guest VLAN, the port
should not be a static member of the guest VLAN.
Example
The following example defines VLAN 2 as a guest VLAN.
Console#
Console# configure
Console(config)# vlan database
Console(config-vlan)# vlan 2
Console(config-vlan)# exit
Console(config)# interface vlan 2
Console(config-if)# dot1x guest-vlan
Page 470
802.1x Commands
dot1x guest-vlan