Show Rmon Events - D-Link xStack DWS-3200 Series Cli Manual

DXS/DWS-3200 series CLI Reference Guide

show rmon events

The show rmon events Privileged EXEC mode command displays the RMON event table.
Syntax
show rmon events
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON event table.
Console# show rmon events
Index Description
----- --------------
1 Errors
2 High Broadcast
The following table describes significant fields shown in the example:
Field
Index
Description
Type
Community
Owner
Last time sent
Type Community
-------- ---------
Log
Log-Trap device
Des cription
An index that uniquely identifies the event.
A comment describing this event.
The type of notification that the device generates about this event. Can have
the following values: none, log, trap, log-trap. In the case of log, an entry is
made in the log table for each event. In the case of trap, an SNMP trap is sent
to one or more management stations.
If an SNMP trap is to be sent, it is sent to the SNMP community specified by
this octet string.
The entity that configured this event.
The time this entry last generated an event. If this entry has not generated any
events, this value is zero.
Page 263
Owner Last time sent
------- --------------------
CLI Jan 18 2006 23:58:17
Manager Jan 18 2006 23:59:48