Show Sntp Configuration - D-Link DES-3010FA Cli Manual
Layer 2 switch, 8 port 10/100 802.3af poe managed switch plus (1)gigabit copper and (1)sfp interface
Hide thumbs
Also See for DES-3010FA:
- Cli manual (348 pages) ,
- Web user manual (281 pages) ,
- Manual (348 pages)
Table of Contents
Advertisement
D-Link DES-3010FA/GA/PA CLI Reference Guide
show sntp configuration
The show sntp configuration Privileged EXEC mode command shows the configuration of the Simple Network
Time Protocol (SNTP).
Syntax
show sntp configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the current SNTP configuration of the device.
Console# show sntp configuration
Polling interval: 60 seconds
No MD5 Authentication keys.
Authentication is not required for synchronization.
No trusted keys.
Unicast Clients Polling: Enabled
Server
-----------
10.6.1.8
10.6.1.12
Broadcast Clients: Enabled
Anycast Clients: Enabled
Broadcast Interfaces: 1
Polling
-------
Enabled
Enabled
Page 63
Encryption Key
--------------
Disabled
Disabled
Hide quick links:
Advertisement
Table of Contents
