Tacacs-Server Source-Ip - D-Link xStack DWS-3200 Series Cli Manual

DXS/DWS-3200 series CLI Reference Guide

tacacs-server source-ip

The tacacs-server source-ip Global Configuration mode command configures the source IP address to be used
for communication with TACACS+ servers. To restore the default configuration, use the no form of this command.
Syntax
tacacs-server source-ip source
no tacacs-server source-ip source
Parameters
•
source — Specifies the source IP address.
Default Configuration
The source IP address is the address of the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the source IP address for all TACACS+ servers.
Console(config)# tacacs-server source-ip 172.16.8.1
Page 397