Table of Contents
Advertisement
User Guidelines
Use the ip access-list Global Configuration mode command to enable the IP-Access List Configuration mode.
Before an Access Control Element (ACE) is added to an ACL, all packets are permitted. After an ACE is added, an
implied deny-any-any condition exists at the end of the list and those packets that do not match the conditions
defined in the permit statement are denied.
Example
The following example shows how to define a permit statement for an IP ACL.
Console(config)# ip access-list ip-acl1
Console(config-ip-al)# permit rsvp 192.1.1.1 0.0.0.0 any dscp 56
Page 38
ACL Commands
Advertisement
Table of Contents
