Show Wlan Aps - D-Link xStack DWS-3200 Series Cli Manual

show wlan aps

The show wlan aps Privileged EXEC mode command displays information on active APs.
Syntax
show wlan aps [name | mac-address]
show wlan aps radio [a | g]
show wlan aps ess [ssid]
show wlan aps vlans [ssid]
show wlan aps version [name | mac-address]
Parameters
•
name — The AP name. (Range: 1-32 characters)
•
mac-address — The AP MAC address.
•
a — Radio type is 802.1a.
•
g — Radio type is 802.1g.
•
ssid — The ESS SSID. (Range: 1-32 characters)
Default Configuration
•
name
•
ssid
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information on active APs.
Console # show wlan aps
Name MAC Address
------ -----------------
AP1 00-9E-92-4C-73-FC
AP2 00-9E-92-4C-73-FD
Wireless AP General Commands
Type State
------ --------
a, g Enabled
a, g Disabled
Page 494
show wlan aps