Security-Suite Enable - D-Link xStack DWS-3200 Series Cli Manual

DXS/DWS-3200 series CLI Reference Guide

security-suite enable

The security-suite enable Global Configuration mode command enables the security suite feature. Use the no
form of this command to disable the security suite feature.
Syntax
security-suite enable [global-rules-only]
no security-suite enable
Parameters
•
global-rules-only — Specifies that all the security suites commands would be only global commands. This
setting saves space in the Ternary Content Addressable Memory (TCAM).
Default Configuration
No protection is configured.
Command Mode
Global Configuration mode
User Guidelines
MAC ACLs should be removed before the security-suite is enabled. The rules can be reentered after the security-
suite is enabled.
If ACLs or policy maps are assigned on ports, per interface security-suite rules cannot be enabled.
Example
The following example enables the security suite feature and specifies that all the security suites commands
would be only global commands.
Console(config)# security-suite enable global-rules-only
Page 245