Table of Contents
Advertisement
3. Register Details
3.2.37
Port0:0E8h / Port1:N/A D_USB_Address (Device USB Address)
Base Address: Port0=000h, Port1=200h
Mode
Ofst Adrs
Register Name
Device
0E8h
D_USB_Address
The USB address is set by the AutoSetAddress function.
The corresponding control transfer is performed automatically by the AutoSetAddress function on receiving a
SetAddress() request. The AutoSetAddress function issues SetAddressCmp status notification after the control
transfer status stage for the SetAddress() request is complete and USB_Address has been set.
Bit7
Reserved
Bit6-0
USB_Address
This sets the USB address.
This is written to automatically by the AutoSetAddress function.
Writing is possible, but it will be rewritten automatically on receiving a SetAddress() request.
300
R/W
Bit Symbol
7:
6: USB_Address [6]
5: USB_Address [5]
4: USB_Address [4]
R ( W)
3: USB_Address [3]
2: USB_Address [2]
1: USB_Address [1]
0: USB_Address [0]
EPSON
Description
0:
1:
USB Address
S2R72V18 Technical Manual (Rev.1.00)
Reset
00h
Advertisement
Table of Contents
