Page 1
CMOS 16-BIT SINGLE CHIP OCONTROLLER S5U1C17564T2 Manual (Software Evaluation Tool for S1C17564) Rev. 1.0...
Page 2
Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products.
Page 3
Product code explanation Device 17xxx 00E1 Packaging specifications 00 : Other than tape or reel 0A : TCP BL 2-direction 0B : Tape and reel BACK 0C : TCP BR 2-direction 0D : TCP BT 2-direction 0E : TCP BD 2-direction 0F : Tape and reel FRONT...
Layout information ........................3 Jumper information ......................... 4 3.2.1 Jumper settings when using S1C17564................4 3.2.2 Jumper settings when using S1C17554................5 Circuit diagram ........................6 Parts List ..........................8 Revision History ....................... 9 Seiko Epson Corporation S5U1C17564T2 Manual (Rev. 1.0)
The S5U1C17564T2 can be used for developing S1C17564 software by connecting to the Seiko Epson S5U1C17001H (ICDmini) emulator. This product includes an IC socket, enabling it to be used with the Seiko Epson S1C17554 single-chip micro-controller in addition to the S1C17564 included.
3. Hardware Information Hardware Information Layout information The S5U1C17564T2 component layout is as shown in Figures 3.1 and 3.2. Extension Connector (J3) * 1 * 2 (foot pattern only Reset SW (SW1) Regulator Enable/Disable Select Jumper (JP2) Extension Connector (J4)
Figure 3.2 S5U1C17564T2 component layout (underside) Jumper information 3.2.1 Jumper settings when using S1C17564 Table 3.1 lists the S5U1C17564T2 jumper functions (for when using the S1C17564). Table 3.1 Jumper function list (when using S1C17564) Jumper Enable internal regulator (default setting)
3. Hardware Information 3.2.2 Jumper settings when using S1C17554 Table 3.2 lists the S5U1C17564T2 jumper functions (for when using the S1C17554). Table 3.2 Jumper function list (when using S1C17554) Jumper (No internal regulator) CLOSE (VIN=HVDD) REGEN DS CLOSE CLOSE (Supply AVDD (supplied via J9) to S1C17554)
3. Hardware Information Parts List Table 3.3 S5U1C17564T2 parts list Location Code, specifications Qty. Manufacturer Part name S1C17564F SEIKO EPSON CORPORATION (TQFP13-64) IC socket (U1) IC51-0644-807-6 YAMAICHI electronics FA-238V 12 MHz EPSON TOYOCOM Crystal oscillator (10pF 50ppm) CORPORATION MC-146(7pF) 32.768...
Need help?
Do you have a question about the S5U1C17564T2 and is the answer not in the manual?
Questions and answers