Epson S2R72V18 Technical Manual page 163

1. Functions
Table 1-61 GoWAIT_CONNECTtoOP timing values (FS or LS mode)
Timing
Parameter
T0 Sets H_NegoControl_0.AutoMode to
"GoWAIT_CONNECTtoOP." (F/W)
Performs the same processing performed for
"GoWAIT_CONNECT." (H/W)
T1 Detects connection and issues connect detection status
notification.
Performs the same processing performed for "GoDISABLED."
(H/W)
T2 Issues disabled completion status.
Performs the same processing performed for "GoRESET." (H/W)
T3 No device chirp normal/error detection status notification issued,
since no device chirp detected. (H/W)
T4 Issues reset completion status.
Performs the same processing performed for
"GoOPERATIONAL." (H/W)
146
Description
EPSON
Value
0 (reference)
T1
T2
T3
T4
S2R72V18 Technical Manual (Rev.1.00)