Cutterbar Doors - MacDon R113 Unloading And Assembly Instructions

9.3 Cutterbar Doors

WARNING
Do NOT operate the machine without all the cutterbar doors down or without curtains installed and in
good condition.
Two doors (A) with rubber curtains provide access to the
cutterbar area.
Curtains (B) and (C) are attached to each front corner and
at the center respectively. Always keep curtains lowered
when operating the rotary disc header.
IMPORTANT:
Replace curtains if they become worn or damaged.
214075
REFERENCE
Figure 9.7: Cutterbar Doors and Curtains
86
Revision A