MacDon R113 Unloading And Assembly Instructions page 60

Rotary disc 13-foot self-propelled windrower header

Hide thumbs Also See for R113:

Table of Contents

6. Determine the center point (A) between the two marks

on the yoke plate, and place a third mark.

7. Rotate the upper roll (B) in the counterclockwise

direction until the bolt lines up with the third

(center) mark.

8. Ensure threads on bolts (A) are clean and free of

lubricant.

9. Apply Loctite

242 (Blue), and tighten bolts (A) to

secure the position. Torque to 95 Nm (70 lbf·ft).

214075

PERFORMING PREDELIVERY CHECKS

Figure 7.7: Conditioner Drive

Figure 7.8: Conditioner Drive

Revision A

Table of Contents