MacDon R113 Unloading And Assembly Instructions page 107

Table .11 Rotary Disc Header for Self-Propelled Windrower Predelivery Checklist (continued)
✔ ✔ Item
Check cutterbar area carefully for loose parts and
hardware on the cutterbar.
WARNING
These objects can be ejected with considerable
force when the machine is started, and may result
in serious injury or machine damage.
Run-Up Procedure
Check hydraulic hose and wiring harness routing to
ensure adequate clearance when raising or lowering
header.
Check hazard lights are functional.
Post Run-Up Check – Stop Engine
Check belt drive for proper idler alignment and
overheating bearings.
Check for hydraulic leaks.
Check that header manuals are in storage
compartment.
Date Checked:
214075
REFERENCE
Reference
7.13 Running up the Header, page 67
7.11 Checking Lights, page 65
7.1 Checking Conditioner Drive Belt, page 49
7.12 Checking Manuals, page 66
Checked by:
101
—
—
—
Revision A