Cutterbar Doors; Opening The Cutterbar Doors: North American Header - MacDon R85 Operator's Manual

5.5 Cutterbar Doors

CAUTION
Do NOT operate the machine without all the cutterbar doors down, curtains installed and in good condition.
Two doors provide access to the cutterbar area.
Rubber curtains are attached to each door, at the front
corners, and center fixed cover.
corners of each curtain keep the curtains together to
minimize the risk of thrown objects.
The cutterbar curtains are very important to reduce the
potential for thrown objects. Always keep these curtains
down when operating the header.
Replace the curtains
worn or damaged.
replacement instructions.

5.5.1 Opening the Cutterbar Doors: North American Header

Follow these steps to open the cutterbar doors on a North American header:
1. Unhook the curtain latches (A).
169455
OPERATION
Latches at the lower
if they should become
Refer to your Dealer for
Figure 5.9: Cutterbar Doors
Figure 5.10: Curtain Latches
28
Revision F