Installing Hose Support For M155E4 - MacDon R113 Unloading And Assembly Instructions
Rotary disc 13-foot self-propelled windrower header
Hide thumbs
Also See for R113:
- Operator's manual (294 pages) ,
- Assembly instruction manual (212 pages) ,
- Unloading and assembly instructions (166 pages)
Table of Contents
Advertisement
2.5 Installing Hose Support for M155E4
1. Remove bolt (A).
2. Loosen bolt (B) and rotate hose support (C) to upright
position.
3. Install bolt (A). Tighten both bolts.
4. Remove shipping material from hose (B), and route
hose through hose support (C). Lay hose on header.
214075
ASSEMBLING THE HEADER
Figure 2.16: Hose Support
Figure 2.17: Hose Support
11
Revision A
Advertisement
Table of Contents
