8.3.2 Installing Conditioner Drive Belt
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
1. Lower rotary disc header fully, turn off engine, and
remove key.
2. Install drive belt (A) onto driven pulley (C) first, and then
onto drive pulley (B) ensuring that the belt is in the
pulley grooves.
NOTE:
If necessary, loosen jam nut and adjuster nut to relieve
spring tension.
214075
CHANGING THE CONDITIONER
Figure 8.25: Conditioner Drive
78
Revision A