Header Lift Cylinder Locks; Drive Shields; Cutterbar Doors - MacDon R80 Operator's Manual

7.4 HEADER LIFT CYLINDER LOCKS

Refer to M150/M200 Self-Propelled Windrower
Operator's Manual for details on the header lift
cylinder locks.

7.5 DRIVE SHIELDS

WARNING
Do not operate the machine with the drive
shields open.
components may throw debris and could
result in death or serious injury.
A
a. To open the left and right drive shields on the
header, pull rubber latch (A) off hook and lift
cover (B) to open position.
b. To close, lower shield and engage pin (C) in
frame.
c. Place rubber latch (A) in hook.
Form # 169089
MAINTENANCE/SERVICE
High speed rotating
B
C

7.6 CUTTERBAR DOORS

WARNING
x
Do not operate the machine without all the
cutterbar doors down, curtains installed and
in good condition.
x
The cutterbar curtains are very important to
reduce the potential for thrown objects.
Always keep these curtains down when
operating the mower-conditioner.
the curtains if they should become worn or
damaged.
There are two doors to provide access to the
cutterbar area.
a. To open door, lift at front of door.
b. To close door pull at top and move to closed
position.
CAUTION
To avoid injury, keep hands and finger
away from corners of doors when closing.
40
Replace
Model Year - 2010