MacDon R113 Unloading And Assembly Instructions page 28

Rotary disc 13-foot self-propelled windrower header

Hide thumbs Also See for R113:

Table of Contents

10. Engage safety props on both lift cylinders as follows:

a. Stop engine and remove key from ignition.

b. Pull lever (A) and rotate towards the header to

release and lower safety prop (B) onto the

lift cylinder.

c. Repeat for opposite lift cylinder.

11. Install clevis pin (A) through support and windrower lift

member, and secure with hairpin (B). Repeat for

opposite side.

IMPORTANT:

Ensure clevis pin (A) is fully inserted and hairpin is installed

behind bracket.

214075

ATTACHING HEADER TO WINDROWER

Figure 3.25: Safety Prop

Figure 3.26: Header Support

Revision A

Table of Contents