MacDon R113 Unloading And Assembly Instructions page 20

CAUTION
To prevent damage to the header lift linkages when
lowering header lift legs without a header or weight box
attached to the windrower, ensure the float springs
tension is fully released.
NOTE:
If not prompted by the Harvest Performance Tracker
(HPT) display to remove header float, remove header
float manually by doing the following:
4. Press rotary scroll knob (A) on the HPT display to
highlight QuickMenu options.
5. Rotate scroll knob (A) to highlight the HEADER FLOAT
symbol (B), and press scroll knob to select. Screen
changes.
6. Press soft key 3 (A) to remove the header float.
NOTE:
If the header float is active, the icon at soft key 3 will display
REMOVE FLOAT; if header float has been removed, the icon
will display RESUME FLOAT.
214075
ATTACHING HEADER TO WINDROWER
14
Figure 3.3: Header Float Spring
Figure 3.4: HPT Display
Figure 3.5: HPT Display
Revision A