13. Attach a spreader bar (A) to a forklift or equivalent, and
attach chains to lugs (B) on conditioner (C). Use a chain
rated for overhead lifting with a minimum working load
of 1135 kg (2500 lb.).
14. Loosen two M16 hex head bolts (A) at each side of
conditioner that secure it to header.
DANGER
To prevent the conditioner from falling backward, ensure
lifting chains are secure and tight. Failure to do so may
result in death or serious injury.
15. Lift the conditioner slightly until bolts are loose, then
remove the bolts. Retain the hardware for reinstallation.
CAUTION
Stand clear when detaching the conditioner.
16. Lift conditioner (A) off header (B), and move it away
from work area.
214075
CHANGING THE CONDITIONER
Figure 8.6: Spreader Bar
Figure 8.7: Left Side of Conditioner –
Right Side Similar
Figure 8.8: Conditioner Lift
71
Revision A