2.4 Unpacking Hoses for M1170 Windrower
1. Remove shipping wire/banding and packing (A) around
hydraulic hoses.
2. Remove bolt (C) from support (B) and discard bolt.
3. Remove hose support (B) from the frame.
4. Lay the hose and electrical bundle (A) on the ground
between the two header supports.
5. Remove shipping wire securing baffle (B) and leave in
lowered position.
214075
ASSEMBLING THE HEADER
Figure 2.14: Unpacking Hoses (Not All Hoses
Shown)
Figure 2.15: Hoses and Baffle
10
Revision A