MacDon R113 Unloading And Assembly Instructions page 80

14. Install washer (A) onto bolt (B) and apply anti-seize
compound to bolt shank only. Do NOT apply to threads.
15. Install bolt (B) with washers (C) as determined
previously.
16. Install three washers (D) and nut (E) onto bolt. Torque
to 332–346 Nm (245–255 lbf·ft).
17. Repeat steps 12, page 73
opposite side.
18. Install bolt (A) through the center link support (C).
19. Install nut (B) and torque to 332–346 Nm
(245–255 lbf·ft).
20. Remove chain securing frame to forks, and back forklift
away from work area.
21. Position hose bundle and hose support (B) onto adapter
and secure with bolts (A) and nuts.
22. Install the conditioner drive belt. Refer to
Conditioner Drive Belt, page
23. Close the driveshields. Refer to
Driveshields, page 85.
214075
CHANGING THE CONDITIONER
to 16, page 74 for
8.3.2 Installing
78.
9.2 Closing
Figure 8.15: Frame Attachment (Left
Side Shown)
Figure 8.16: Frame (Center Support)
Figure 8.17: Hose Support
74
Revision A