Cutterbar Doors - MacDon R85 Operator's Manual

3.5 Cutterbar Doors

The R85 comes in two configurations—one configured for use in North America and one configured for use outside
of North America. The configuration is specified in the title when necessary.
CAUTION
Do NOT operate the machine without all the cutterbar doors down. The curtains should be installed and
in good condition.
Two doors provide access to the cutterbar area.
Rubber curtains are attached to each door at the front
corners and center fixed cover.
corners of each curtain keep the curtains together to
minimize the risk of thrown objects.
The cutterbar curtains reduce the potential for thrown
objects. Always keep curtains down when operating
the header.
Replace the worn or damaged curtains. Refer to your
Dealer for replacement instructions.
147757
OPERATION
Latches at the lower
30
Figure 3.9: Cutterbar Doors
Revision B