MacDon R113 Unloading And Assembly Instructions page 44

Rotary disc 13-foot self-propelled windrower header

Hide thumbs Also See for R113:

Table of Contents

NOTE:

If the windrower is equipped with a reverser valve (A) for

an auger header, route the return hose (B) from port R1

on the reverser valve to the steel line attached to motor

port (C).

13. Connect the case drain hose (A) from the lift manifold

port T3 to the fitting attached to motor port (D).

214075

ATTACHING HEADER TO WINDROWER

Figure 3.62: Windrower Hose Connections with

Reverser

Figure 3.63: Hydraulic Connections

Revision A

Table of Contents