In "RS232" interface, user can set and view relevant interface parameters
about RS232.
i.
Baud Rate
The available baud rates include 4800 9600, 19200, 38400 , 57600 , and
115200 bps.
ii. Parity
The available parity modes include None, Even, and Odd.
iii. Stop Bits
The available stop bits include 1 or 2.
iv. Data Bits
The default data bits is 8.
v. Flow
The default flow is None.
Set GPIB Adress
Before using the GPIB interface, use the USB-GPIB interface converter to
extend the GPIB interface, and then use the GPIB cable to connect the load to
the PC. Figure 3-7 shows the GPIB interface.
70
Figue 3-6 RS232 Interface