Table of Contents
Advertisement
Connection Status
IP configuration include two modes:
� DHCP(Dynamic host configuration protocol)
� Manual IP(Manual configuration)
In different IP configuration modes, the configurations for IP address and other
network parameters are different.
1) DHCP
Under DHCP mode, the DHCP server on the current network assigns
network parameters (such as the IP address) to the instrument. When
DHCP is ON, relevant parameters can not be edited; When DHCP is OFF,
the IP address must be set manually.
2) Manual IP
In this mode, the user needs to set sufficient IP net parameters.
Physical address is also called media access control address (MAC
address). It is also called the hardware address, which can be used to
define the location of the network device. The physical address for one
device is unique and is not allowed to be modified. It can be used to identify
the instrument when you assign the IP address to the instrument. A physical
address is a 48-bit (6-byte) addressing scheme, usually represented in Hex.
For example, 00-80-e1-00-00-00.
3.3 Sound
Press Shift and CP key to enter system utility function interface. Then press
"Sound" to enter the Sound menu, as shown in figure 3-9.
72
Figure 3-9 Sound tab
Advertisement
Table of Contents
