Table of Contents
Advertisement
3. Function buttons
Press the button to enter the constant current mode. Enter DYN
mode by pressing the shift button at the same time.
Press the button to enter the constant voltage mode. Enter AUX
mode by pressing the shift button at the same time.
Press the button to enter the constant power mode. Enter Utility
mode by pressing the shift button at the same time.
Press the button to enter the constant resistor mode. Enter
LED mode by pressing the shift button at the same time.
Press the button to enter Display mode. Enable key lock
function by pressing the shift button at the same time.
Press the button to use the Restore function.
Press the button to allow a button's secondary function to be
selected.
Press the button to enter the Short function.
Use the right, left, up, down buttons to move the cursor in that
direction or select the appropriate field.
0-9
Select the appropriate numerical digit.
Decimal point.
Push to Enter a value.
This key selects a function in the interface.
4. Input Terminal
Physical input connections for the external circuit under test.
5. USB interface
Interface port used to insert USB device. Supports FAT32 file system formats.
6. Power key
Turns the instrument On or Off.
7. Function key
Used to select different interface functions
.
7
Advertisement
Table of Contents
