Table of Contents
Advertisement
Figure 2-39 Battery Test Function Page 2
The parameters for the Battery test mode include Function, Range,
Current, V_Stop, C_Stop, T_Stop . The interface menu can be divided
into two pages.
Set Function
Choose CC, CR, or CP mode
Set range
Current range: 5 A or 30 A
Voltage range: 36 V or 150 V
Set current
The discharge current of the Battery test function. The default unit for
the value is Ampere (A).
Set V_Stop
The cut-off voltage in the Battery test function . When the battery
voltage reaches the cut-off voltage, the load stops discharging
automatically. The default unit for V_Stop is Volts (V).
Set C_Stop
The cut-off discharge capacity in the Battery test function . When the
accumulated capacity is greater than the cut-off capacity, the load
43
Advertisement
Table of Contents
