Table of Contents
Advertisement
The Battery test function reflects the reliability of the battery and the
remaining battery life.
Take CC mode as example (other modes are similar)
Operating Steps
1. Connect device
Power on the instrument and connect the DUT and the channel input
terminals of the electronic load, as shown in Figure 2-2.
2. Set running parameters
Press the Shift + CV key on the front panel , select "Battery" then enter
the Battery test operation mode, as shown in 2-38, 2-39.
42
Figure 2-37 OPPT Test Function
Figure 2-38 Battery Test Function
Advertisement
Table of Contents
