Editing Cue Attributes - Leviton 600 User Manual

Chapter 5 Cues
Up: assigned Up fade time
Dwn: assigned Down fade time
Dly: assigned Delay time
Flw: assigned Follow time
Lnk: assigned Link
Table 5.1 Cuesheet Attributes
To change the attributes of the currently selected cue, press the key on the
console corresponding to the specific attribute you want to change, then
enter the attribute information followed by the [ENTER] key. Multiple cue
attributes may be entered before the [ENTER] key is pressed. See

Editing Cue Attributes

Editing Cue Attributes
Follow the example below to modify a follow time attribute from the
Cuesheet display:
Procedure:
1. Press [CUESHEET]
2. Press [CUE] [5]
3. Press [FOLLOW] [7]
4. Press [ENTER]
You can quickly edit cue attributes from the Stage, Preview, Cuesheet
or Tracksheet displays. For example, to edit a fade time, just press
[CUE] [#] [TIME] [#] [ENTER].
Page 68
Eff: assigned Effect
Mac: assigned Macro
Grp: assigned Group
below for an example procedure.
Notes:
Or use the up/down arrow
keys
New Follow time recorded
Rev. 1.30.03.07.r1