Chapter 7 Effects
Creating and Editing Effects
To create or edit an effect from either the Stage or Preview displays, press
(SelEff) [#] [ENTER].
If the number of the effect does not exist, a new effect will be created
at the given number.
Creating a Step
Follow the example below to create an effect with a channel assigned to
element one of step one:
Procedure:
1. Press [STAGE] or [PREVIEW]
2. Press (SelEff) [1] [ENTER]
3. Use the up arrow key to move
cursor to "Effect" field
4. Enter effect name using submaster
bump buttons.
5. Use the down arrow key to move
cursor to "Type" field
6. Use left/right arrow keys to select
type of pattern
7. Use the down arrow key to move
cursor to "Fade" field
8. Press [3]
9. Use the down arrow key to move
cursor to "Dwell" field
10. Press [5]
11. Use right arrow key to move
cursor to element 1 (purple box)
12. Press [20] [ENTER]
13. Press down arrow key to move
to level field
14. Press [75] [ENTER]
Page 118
Notes:
Hold down Leviton logo key
for uppercase letters
Enters 3.0 second fade
Enters 5.0 second dwell
Selects channel 20 at FL
Channel 20 set to 75%
Rev. 1.30.03.07.r1