Setting Number Of Submasters; Setting Number Of Macro Pages - Leviton 600 User Manual

User Guide

Setting number of Submasters

The console is capable of holding up to 8 pages of submasters. Each page
contains 24 submasters which correspond to the submaster faders. The
total console capacity is 192 submasters.
Follow this example to set the number of submaster pages to four:
Procedure:
1. Press [SETUP]
2. Press [8] [ENTER]
3. Press [4] [ENTER]
4. Select [1] from Memory re-order
confirmation box
Chapter 4 Submasters
See

Setting number of Macro Pages

A macro is a recorded sequence of commands that may be played back
with the touch of one of the 8 macro hard-keys. The console is capable of
holding up to 64 pages of macros for a console capacity of 500 macros.
Each page contains 8 macros which correspond to the macro keys.
Follow this example to set the number of macro pages available to 20:
Procedure:
1. Press [SETUP]
2. Press [9] [ENTER]
3. Press [20] [ENTER]
4. Select [1] from Memory re-order
confirmation box
Remember, increasing the number of Channels, Groups, Macros,
Effects, Steps, and Submasters will affect the remaining amount of
available console memory.
Rev. 1.30.03.07.r1
Notes:
Opens the Setup display
Selects menu item
8: "Number of
Submaster pages"
Valid numbers are 1 to 8
Press [CLEAR] to cancel
for additional information on using submasters.
Notes:
Opens the Setup display
Selects menu item
9: "Number of macro pages"
Valid 1 to 64
Press [CLEAR] to cancel
Chapter 12 System Settings
Page 189