Preview Displays; Preview Displays: Cue, Submaster, Group; Effect Sub-Display (Preview) - Leviton 600 User Manual

Chapter 2 Displays

Preview Displays

Preview Displays: Cue, Submaster, Group

To access these displays, press
the [PREVIEW] hard-key. The
Cue display is the default
preview display, the Group and
Submaster sub-displays are
accessed by pressing the
(SelGrp) and (SelSub) soft-
keys respectively.
The Preview display shows the
recorded channel or device trait
levels of a cue, group, or
submaster. Cues, groups and
submasters may also be created or edited in this display. The Preview
display is a blind display, meaning none of the levels shown in this display
can be seen as light output on the stage. The Cue, Group and Submaster
Preview displays are very similar in appearance with a few differences. For
more information and operational procedures please see
Chapter 4 Submasters
Any edits to levels or fade parameters are automatically recorded in a
Preview display as they are made; it is not necessary to press a record
key. Using the record keys in this screen will record the stage levels not
changes made here.

Effect Sub-Display (Preview)

This blind display is very similar in appearance to the Effect sub-display of
Stage, which is described earlier in this chapter. The main difference is that
edits done here cannot be seen live on stage.
To access this display while in Preview, press the (SelEff) soft-key followed
by the effect number, then press [ENTER]. Please refer to
Effects
Page 20
and
for more information and operational procedures.
Chapter 6 Groups
.
Chapter 5 Cues,
Chapter 7
Rev. 1.30.03.07.r1