Effect Sub-Display (Stage); Playback Display; Device Display - Leviton 600 User Manual

User Guide

Effect Sub-Display (Stage)

From the Effect sub-display you
can create, edit and test effects.
It is accessed by pressing
(SelEff) followed by the effect
number then [ENTER]. Note
that the Effect sub-display can
also be accessed from the
Preview display for blind
operation. See
Effects
.

Playback Display

To access this display press the
[PLAYBACK] hard-key. The
Playback display is used to view
the current status of any
running cues and active
submasters. The upper area of
the Playback display is the
Cuesheet Area, which lists each
cue and its attributes. See
Chapter 5 Cues
information on cue playback.

Device Display

To access this display press the
[DEVICE] hard-key. The
Device display shows the list of
automated devices being used
and the current settings of the
device traits. Changes are made
to the trait settings by using
one of the seven encoder
wheels or the trackball. Up to 5
devices are displayed at one
time. See
Automated Devices
Rev. 1.30.03.07.r1
Chapter 7
for operational
Chapter 10
.
Chapter 2 Displays
Page 19