Editing Cues; Editing Cues In The Stage Display - Leviton 600 User Manual

User Guide

Editing Cues

If you would like to edit channels in a cue that has already been recorded,
you can either play back the cue live from the Stage display or work blind in
the Preview or Tracksheet displays.
Editing, as in recording, while in different Cue Record Modes produces
different results. See the
chapter for more information.

Editing Cues in the Stage Display

To edit a cue live, either play back the cue with the playback faders or press
[CUE] [#] [FULL]. Then make the changes you want and re-record the
cue. For more information on Cue Playback, please see the
Cues
section later in this chapter.
For example: Assume Cue 1 is already recorded with channels 1 thru 24 at
75. To just adjust channels 10 thru 20 to 80 follow below:
Procedure:
1. Press [STAGE]
2. Press [ENTER] [AT] [ENTER] [CLEAR]
to clear screen (if necessary)
3. Press [CUE] [1] [FULL]
3. Press [10] [THRU] [20]
4. Press [AT] [80]
5. Press [RECORD CUE] [1]
6. Press [ENTER]
Rev. 1.30.03.07.r1
Cue Record Modes
section further in this
Notes:
Or play back the cue with the
Playback faders
Selects channels to be
recorded
Sets channel levels
Warning will appear, Press
[ENTER] to overwrite
previous cue
Chapter 5 Cues
Playing Back
Page 65