Setting Up Your Console; Unpacking The Console; Physical Setup - Leviton 600 User Manual

Appendix A Installation

Setting up your Console

Unpacking the console

Carefully unpack your console from its carton. Underneath the console, you
will find:
• This guide
• Quick Reference Card
• Training Video
• System Disk
• A 7' AC power cable
• One 3.5", 1.44MB floppy show storage disk
• 1 or more gooseneck Worklight fixtures (if the option was ordered)
In a separate shipping container, (if ordered) you will find the console
monitor. Carefully inspect all items for evidence of shipping damage. If any
damage is noted, call the shipping company for an inspection. It is
recommended that you keep the shipping containers or purchase a touring
case in the event you need to transport your console.

Physical Setup

Place your console on a sturdy horizontal surface with at least 6" (152mm)
of clearance behind the console for cables and for proper ventilation. The
environment should be dust-free with an ambient temperature of 40 F (4 C)
to 90 F (32 C) and a relative humidity between 8% and 80% without
condensation.
WARNING! Do not expose console to rain or moisture, or
damage may occur.
Page 218 Rev. 1.30.03.07.r1