Using The Only Key With Groups - Leviton 600 User Manual

User Guide

Using the Only Key with Groups

The Only key is very useful when working with Groups. It can be used to
select "only" a channel or selection of channels from within a group. This
selection could be used to record other groups, subs, or cues. For example,
to select channels from a group live from the Stage display:
Procedure:
1. Press [STAGE]
2. Press [GROUP] [20]
3. Press [ONLY]
4. [5] [THRU] [10]
5. [FULL] or enter a level
using [AT] [#]
By using Only you can also select certain devices from a group of devices.
For example, if group 5 contained pan and tilt trait levels for devices 1
through 8 you could select only the pan and tilt trait levels for device 3 and
record them into another group:
Procedure:
1. Press [DEVICE] display key
2. Press [GROUP] [5]
3. Press [ONLY] [DEVICE] [3]
[ENTER]
4. Use Trackball to place cursor
over device 3 trait name and
press [SELECT] to highlight
5. Press [RECORD GROUP] [6]
6. Press [ENTER]
Alternatively in step 4, you could press [DEVICE] [3] [ENTER] and adjust
the pan and tilt traits by using the trackball or encoder wheels.
To release traits so that they will not be recorded, press (RelAll). See
Chapter 10 Automated Devices
devices.
Rev. 1.30.03.07.r1
Notes:
Group 20 has channels 1 - 24
already recorded
Only channels 5 - 10
appear on screen
Notes:
Opens Device display
Use Device key on
keypad
Trait captured for record
when white
Only device 3 pan and
tilt positions are
recorded to group 6
for more information on working with
Chapter 6 Groups
Page