Recording Submasters; Changing Submaster Pages - Leviton 600 User Manual

Chapter 4 Submasters

Recording Submasters

The [RECORD SUB] hard-key records the instantaneous "look" of the
current Stage display by recording all channels, groups, effects, macros and
devices at their current levels. This includes all levels that may be
originating from level setting commands, cues, running effects or other
subs. The Record Sub command can be executed from any display except
Setup.
Follow these example steps to record a simple pile-on submaster from the
Stage display:
Procedure:
1. Press [STAGE]
2. Select channels and set
channel levels
3. Press [RECORD SUB] [10]
4. Press [ENTER]

Changing Submaster Pages

The default setting for the number of submaster pages is (1). See
Chapter 12 System Settings
submaster pages.
To change submaster pages, follow below:
Procedure:
1. Press (SubP #) while in the
Stage, Preview or Playback displays
You can also enter a specific page directly: Press (SubP #), enter page
number, then press [ENTER].
See also
this chapter.
Page 42
Submaster Page Changes in Playback Display
Notes:
Creates look
If submaster 10 has already
been recorded, a warning
message will appear on the
screen. Press [ENTER] again
to overwrite.
for procedures on how to add more
Notes:
Repetitively pressing this key
will advance through the
pages one by one
section further in
Rev. 1.30.03.07.r1