Custom Patching Channels To Dimmers - Leviton 600 User Manual

User Guide

Custom Patching Channels to Dimmers

You can create a custom patch by pressing the number of the channel that
you want to assign, followed by the [DIMMER] key. At this point, you can
enter dimmer number assignment(s).
Follow these example steps to patch channel 2 to dimmer 5 at full:
Procedure:
1. Press [PATCH]
2. Enter [2] on keypad
3. Press [DIMMER]
4. Enter [5] on keypad
5. Press [ENTER]
In all patching commands, it is not necessary to specify channel
numbers with a channel key. The console automatically assumes that
the channel is addressed in the first part of the command and the
dimmer in the second part, unless the [DIMMER] key is pressed first.
Rev. 1.30.03.07.r1
Chapter 9 Patching
Notes:
Opens Patch display
Selects channel 2 for patching
Selects dimmer 5
Use the [AND], [MINUS]
and [THRU] keys for multiple
dimmers.
Command line reads:
"Channel 2 To Dimmer 5"
Page 139