Patching Automated Devices - Leviton 600 User Manual

User Guide

Patching Automated Devices

Automated Devices are patched from the Device Assignments sub-display
of the Setup display. See
information.
In the Patch display, the location of automated device patching is shown by
device numbers in the device column. For example, the screen shot in
Figure 9.1 below shows the 16 device traits of Device 1 (Dv 1) patched to
dimmer addresses 1-16 on Port C.
Figure 9.1 Patch Display showing Devices
Rev. 1.30.03.07.r1
Chapter 10 Automated Devices
Dimmer Addresses Device Traits
Chapter 9 Patching
for additional
Page 141