Navigating The Patch Display - Leviton 600 User Manual

User Guide
Channel
Figure 9.0 Sample Patch Display

Navigating the Patch Display

To navigate the Patch display, use the arrow keys next to the keypad to
scroll or page through the patch list. The up/down arrow keys will scroll and
the left/right arrow keys will page.
You can also enter the dimmer or channel number directly to view an
assignment. For example, press [DIMMER] [05] [ENTER] to view
dimmer 05 or press [10] [ENTER] to view channel 10.
Before we get into further details about how to create patches, let's look at
the different ways the information can be presented:
Viewing Specific Ports, [S1]
The console outputs three ports of dimmer data, referred to as Ports A, B,
and C. Each port outputs up to 512 dimmer channels of data for a total of
1,536 dimmer output channels. Viewing the patch by port allows you to
narrow your view to only those control channels which are patched to a
specific port. Pressing the [S1] soft-key toggles between viewing Port A,
Port B, Port C and viewing all ports.
Rev. 1.30.03.07.r1
Dimmer Proportional Level
Chapter 9 Patching
Assigned Profile
Page 137