Channel Bump/Toggle Buttons - Leviton 600 User Manual

User Guide

Channel Bump/Toggle Buttons

Console models with channel faders have a bump button associated with
the individual channel faders. Menu item 6 allows the user to change the
operation of the channel bump buttons from momentary on/off to
maintained on/off. When set to "off" the bump buttons are normal
momentary flash to full. When set to "on" the channel bump buttons toggle
on and off.
Follow these steps to select a Channel Flash or Toggle mode:
Procedure:
1. Press [SETUP]
2. Press [6] [ENTER]
3. Use the up/down arrow keys to select
either On or Off
4. Press [ENTER]
Chapter 3 Setting Channel Levels
See
channel bump buttons.
Rev. 1.30.03.07.r1
Chapter 12 System Settings
Notes:
Opens the Setup display
Selects menu item
6: "Ch Bump Tog"
On = Toggle
Off = Flash mode
(default)
Confirms selection
for more information on using the
Page 187