Live Displays; Stage Display; Dimmer Output Sub-Display (Stage) - Leviton 600 User Manual

Chapter 2 Displays

Live Displays

Stage Display

To access this display press the
[STAGE] hard-key. The Stage
display is a live view showing
the current levels of all
channels, including active and
captured channels. The levels
on the screen accurately
represent in percent form those
levels actually output by the
console. The level of each
channel is located below its
respective channel number. The
lack of a level number indicates
a level of zero and that the channel is neither active nor captured. Any
record command takes a "snapshot" of all channel levels that appear in the
Stage display. The Stage display shows 144 channels, additional channels
can be scrolled by using the up/down arrow keys. The Stage display also
has areas which show the status of the A/B and C/D playback faders,
multipart cues, and a command line area. Please see
information on how to record and playback cues.

Dimmer Output Sub-Display (Stage)

The Dimmer Output sub-
display is viewed by pressing
the (Levels) soft-key while in
Stage display. Pressing the
(Levels) soft-key again will
return you to the channel view.
The actual dimmer output
levels are shown in the display
with respect to the assigned
profile. Individual dimmers can
be given levels (parked) that
will hold until cleared. This
display is useful for setting minimum dimmer levels that are not recorded or
doing a fast dimmer check. See
information on this feature.
Page 18
Chapter 3 Setting Channel Levels
Chapter 5 Cues
for
for more
Rev. 1.30.03.07.r1