Active Channels - Leviton 600 User Manual

User Guide
All captured channels are unaffected by executed cues; pressing the
[GO] button does not affect them, even if the channels have new level
assignments in the new cue. Captured channels remain under active
control of the trackball until control is released by pressing the
[CLEAR] key. A "CH" icon at the top right of the display shows when
channels are captured and disappears when channels are released.

Active Channels

Active channels include all captured channels plus any channel level which
may be originating from any other sources on the console. Note that any
record function will include these levels.
To completely clear the Stage display of both active and captured channels
follow the steps below:
Procedure:
1. Press [ENTER] [AT] [ENTER]
2. Press [CLEAR]
.
Rev. 1.30.03.07.r1
Chapter 3 Setting Channel Levels
Notes:
All channels completely
cleared
Page 35